subject: (Fwd) RE: DD -> Netcat NT Imaging
posted: Fri, 7 Jun 2002 13:50:34 +0100


image UR w2k boxes over the LAN with linux

------- Forwarded message follows -------
From: "Estes, Matt CPR / FCBS" <[email protected]>
To: "Estes, Matt CPR / FCBS" <[email protected]>,
"'Keith Tyler'" <[email protected]>,
"'[email protected]'" <[email protected]>
Subject: RE: DD -> Netcat NT Imaging
Date sent: Fri, 31 May 2002 15:15:06 -0400

[ Double-click this line for list subscription options ]

Some links of where to get the tools:
dd.exe - http://www.weihenstephan.de/~syring/win32/UnxUtils.html
netcat.exe - http://www.atstake.com/research/tools/#network_utilities

Matt

> -----Original Message-----
> From: Estes, Matt CPR / FCBS
> Sent: Friday, May 31, 2002 2:47 PM
> To: 'Keith Tyler'; Estes, Matt CPR / FCBS; [email protected]
> Subject: RE: DD -> Netcat NT Imaging
>
>
> Yes. I imaged a couple gigs of data from Win2000 NTFS to my
> linux box (on a second hard drive). I reviewed a couple of
> samples from both drives using "dd if=\dev\hdb1 count=100 |
> hexdump" . That's when I thought I noticed the byte swap....
> wait? MAYBE NOT?!
>
> It is likely the default "hexdump" output on linux was
> swapping the bytes and the "conv=swab" argument is
> unnecessary. I wrote a new format file to use with hexdump:
>
> "%07.7_Ax\n"
> "%07.7_Ax " 16/1 "%02x " "\n"
>
> compared with the default that swapped bytes (takes in
> two-byte chunks):
>
> "%07.7_Ax\n"
> "%07.7_Ax " 8/2 "%04x " "\n"
>
> It seems to work great WITHOUT the "conv=swab" argument.
>
> Matt
>
> > -----Original Message-----
> > From: Keith Tyler [mailto:[email protected]]
> > Sent: Friday, May 31, 2002 2:00 PM
> > To: 'Estes, Matt CPR / FCBS'; [email protected]
> > Subject: RE: DD -> Netcat NT Imaging
> >
> >
> > Have you tried this yet?
> >
> > -----Original Message-----
> > From: Estes, Matt CPR / FCBS [mailto:[email protected]]
> > Sent: Friday, May 31, 2002 9:33 AM
> > To: [email protected]
> > Subject: DD -> Netcat NT Imaging
> >
> >
> > Just wanted to know the forensics comments for doing the
> > following. The
> > practical applications are amazing (and free), but maybe I'm
> > just catching
> > up
> > with the norm.
> >
> > Run "nc -l -p 4000 | dd of=/dev/hdb1 bs=512 conv=swab" to
> > setup a netcat
> > server piping to hdb1 partition on my linux box.
> >
> > Run "dd.exe if=\\.\C: bs=512 | nc.exe a.b.c.d 4000" on my Win
> > 2000 box.
> >
> > swab option was necessary because somewhere along the way the
> > bytes were
> > swapped (network ordering? compiler differences with nc.exe?).
> >
> > Instant bit copy of the partition across the network... and
> > no annoying
> > overhead. I believe this would work as live imaging of
> harddrives for
> > analysis (comments appreciated). But, it's also a network
> > drive imaging
> > system that fits on a floppy and works between OS's.
> >
> > Matt
> >
> > -----------------------------------------------------------------
> > This list is provided by the SecurityFocus ARIS analyzer service.
> > For more information on this free incident handling, management
> > and tracking system please see: http://aris.securityfocus.com
> >
>

-----------------------------------------------------------------
This list is provided by the SecurityFocus ARIS analyzer service.
For more information on this free incident handling, management
and tracking system please see: http://aris.securityfocus.com
------- End of forwarded message -------

generated by msg2page 0.06 on Jul 21, 2006 at 19:04:39

 search: